Description: A two-component, room-temperature vulcanizing (RTV-2) silicone rubber designed for high-fidelity reproduction of tire patterns. This material cures to a durable, high-strength elastomer suitable for casting various materials.
Technical Advantages:
-
Deep Section Cure: Consistent curing throughout the mold, even in thick sections required for large tire molds.
-
Detail Capture: Micron-level reproduction capability captures the finest textures, including matte finishes and micro-text on tire sidewalls.
-
Robust Physical Properties: High tensile strength and elongation at break allow for repeated use in production environments without deformation.
-
Easy Operation: Simple mixing ratio (e.g., 100:2 or 1:1) and extended pot life allow sufficient time for vacuum degassing and pouring.
Ideal For:
-
Creating split molds and block molds for complex tire designs.
-
Low-volume production runs of rubber or plastic tires.
| Item | Color | Viscosity (mPa·s) | Hardness (Shore A) | Tensile Strength (MPa) | Elongation at Break % | Tear Strength (N/mm²) | Linear Shrinkage % |
| YS805 | White/translucnet | 12000±2000 | 5±2 | ≥1.5 | ≥550 | ≥8 | ≤0.3 |
| YS810 | White/translucent | 14000±2000 | 10±2 | ≥1.9 | ≥500 | ≥13 | ≤0.3 |
| YS815 | White/translucent | 16000±2000 | 15±2 | ≥2.1 | ≥500 | ≥17 | ≤0.3 |
| YS820 | White/translucent | 20000±2000 | 20±2 | ≥2.5 | ≥450 | ≥22 | ≤0.3 |
| YS825 | White/translucent | 21000±2000 | 25±2 | ≥3.0 | ≥450 | ≥23 | ≤0.3 |
| YS830 | White/translucent | 22000±2000 | 30±2 | ≥3.5 | ≥350 | ≥23 | ≤0.3 |
| YS835 | White/translucent | 22000±2000 | 35±2 | ≥3.5 | ≥310 | ≥22 | ≤0.3 |
| YS840 | White/translucent | 22000±2000 | 40±2 | ≥4.0 | ≥310 | ≥20 | ≤0.3 |
Reviews
There are no reviews yet.